Rotary Seal, inside sealing for high velocities RSI0 pages
Rotor-Dichtsatz, innendichtend
Rotary Seal, inside sealing
schnellaufend / for high velocities
RSI
Rotor-Dichtsatz, schnellaufend,
innendichtend
Rotary Seal for high velocities,
inside sealing
Der Hunger Rotor-Dichtsatz RSI besteht aus einem
Gleitring aus höchst verschleißfestem PTFE-Compound und drei (doppeltwirkend) bzw. zwei (einfachwirkend) O-Ringen aus Fluorkautschuk, welche die
Vorspannung der Dichtlippen erzeugen.
The Hunger rotary seal type RSI consists of a highest
wear-resistant PTFE-compound slide ring and three
(double-acting) or two (single-acting) O-rings made of
Fluoro Rubber Monomer, which provide the pretension of the sealing lips.
Durch zusätzliche axiale Verklemmung der Dichtung
wird sichergestellt, daß die dynamische Bewegung am
Innendurchmesser erfolgt.
Additional axial fixing of the seal ensures that dynamic movement takes place at the internal diameter.
Je nach Anforderung und Betriebsbedingungen empfiehlt sich eine Behandlung der Gegenlauffläche, wie
z. B. Härten auf ca. 56 HRC oder Hartverchromen.
Depending on the specifications and operating conditions it is recommended to have the running surface
hardened to approx. 56 HRC or hard chromium plated.
177
"