MF Narrow Line Width Conduction-Cooled, Fiber-Coupled0 pages

Narrow Line Width
200ìm or 400ìm, 25W, 808nm, 976nm, 981nm
Condu ction -Coo led Si ngle Bar, Fiber-Coupled Module
Features
- Narrow line width of <0.5nm
- High coupling efficiency
- High brightness
- Conduction-cooled
- Sealed housing
- Standard fiber coupling (HP-SMA) for 200ìm or 400ìm NA 0.22
Optional Accessories
- Monitor photo diode
Device Specification
Optical Parameters1
Units
Center Wavelength Range3
nm
808
976
981
Center Wavelength Tolerance
nm
±0.8
±0.8
±0.8
Output Power per Bar2
W
25
25
25
Spectral Width (FWHM)
nm
„T0.5
„T0.5
„T0.5
Slope Efficiency per Bar
W/A
>0.5
>0.5
>0.5
Wavelength Temp. Coefficient³
nm/°C
~0.015
~0.015
~0.015
Fiber Parameters
Numerical Aperture
NA
0.22
Fiber Core Diameter
ìm
200 or 400
Fiber Connector
HP-SMA 905 with Free Standing Fiber Tip
Electrical Parameters1
Power Conversion Efficiency
%
30
30
30
Threshold Current (ITH)
A
„T8
<7.5
<7.5
Operating Current (IOP)
A
„T55
„T55
„T55
Operating Voltage per Bar (VOP)
V
<1.9
<1.9
<1.9
Thermal Parameters
Operating Temperature3, 4
°C
+20 to +30
Storage Temperature4
°C
0 to +55
Recommended Heatsink Capacity
W
70
1Data at 25°C cold plate temperature, unless otherwise stated.
2Reduced lifetime if used above nominal operating conditions.
3Others available upon request.
4A non-condensing environment is required for storage and operation below the ambient dew point.
5Within operating temperature ±3°C