Fiber Cables0 pages

High Power SMA/SMA Fiber

Features
- Free standing fiber tip
- High centricity

Device Specification
Parameter

Units

Connector Type

SMA 905 Both Sides, with Free Standing Fiber Tip.

Ferule Diameter

mm

3.167 – 3.172

mm

9.5

mm

7.6

Fiber Length

m

2 or 5 ± 0.1

Numerical Aperture

NA

0.22 ± 0.02

Numerical Aperture

NA

0.22 ± 0.02

Outer Diameter

(Largest Diameter at Connector)

Cable Diameter
1

Core Diameter

1, 2

Cladding Diameter

µm
2

200

400

µm

280

480

600

800

720

880

Centricity

µm

<6

Long Term Bending Radius (Coil Radius) 3

mm

44

96

144

176

Short Term Bending Radius

mm

22

48

72

88

1

Others available upon request.
Can differ by ±2%.
3
Minimum value.
2

Dimensions

U.S. CFR Regulation
The manufacturer and subsequent sale of laser equipment is under the guidelines governed by the U.S. Center for Devices and Radiological
Health (CDRH). In accordance to those guidelines, specifically Subchapter J of the Radiation Standards, 21 CFR, the diode laser is
registered as a CLASS 4 laser product.

VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION!
CLASS 4 LASER PRODUCT
IEC 825-1
610584

DI-032012

European Commission
In accordance to EN 60825, Safety of Laser Products, the diode laser is registered as a CLASS 4 laser product.
Products specifications are subject to change without notice. For handling precautions, please reference the general handling instruction
manual. For additional information, please contact your local sales representative or visit our website at www.dilas-ils.com.

DILAS Industrial Laser Systems
a division of DILAS Diodenlaser GmbH
Galileo-Galilei-Straße 10
55129 Mainz
Germany
Phone: +49 (6131) 9226 400
Fax:
+49 (6131) 9226 444
Email: sales@dilas-ils.com
www.DILAS-ILS.com