Homogenized Line, Conduction-Cooled 880nm0 pages
Conduction-Cooled, Multi-Bar Module
with Homogenized Laser Beam
Features
-
Single wavelength
Homogenized laser beam
Thermal interface by base-plate
Scalable output power
Optional Accessories
- Integrated monitor photo diode
- Integrated NTC temperature sensor
Device Specification
Optical Parameters1
Units
Center Wavelength Range3
nm
Center Wavelength Tolerance
nm
±5
W
600
Output Power2
Spectral Width (FWHM)
880
nm
<5
Length
mm
<12
Width
µm
325 ±25
mm
160 ±10
%
97.5
nm/°C
0.31
Power Conversion Efficiency
%
≥45
Threshold Current (ITH)
A
15
Operating Current (IOP)
A
70
Operating Voltage (VOP)
V
<24
Operating Temperature2, 3, 4 (Cooling Plate)
°C
Storage Temperature4
°C
Recommended Heat Sink Capacity
W
+20 to +30
+20 to +30
0 to +55
+20 to +30
0 ≥750
to +55
0 >300
to +55
Beam Size6
Working Distance
Homogeneity5
Wavelength Temp. Coefficient
Electrical Parameters1
Thermal Parameters
1
Data at 25°C cold plate temperature, unless otherwise stated.
Reduced lifetime if used above nominal operating conditions.
3
Others available upon request.
4
A non-condensing environment is required for storage and operation below the ambient dew point.
5
Defined as 1-(Imax-Imin)/(Imax+Imin) within 10.5mm line length.
6
Length is based on 95% power included; width is based on 90% power included.
2