FILM THERMOFORMING MACHINES: TVP64 / TVP670 pages

table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:7.00pt "Arial", sans-serif; } .font1 { font:8.00pt "Arial", sans-serif; } .font2 { font:9.00pt "Arial", sans-serif; } .font3 { font:10.00pt "Arial", sans-serif; } .font4 { font:11.00pt "Arial", sans-serif; } .font5 { font:12.00pt "Arial", sans-serif; } .font6 { font:19.00pt "Arial", sans-serif; } .font7 { font:20.00pt "Arial", sans-serif; } .font8 { font:23.00pt "Arial", sans-serif; } .font9 { font:27.50pt "Arial", sans-serif; } .font10 { font:29.00pt "Arial", sans-serif; } .font11 { font:38.00pt "Arial", sans-serif; } .font12 { font:40.00pt "Arial", sans-serif; } .font13 { font:3.75pt "Franklin Gothic Medium", sans-serif; } Features HA(y)ER PACKAGING TECHNOLOGY machines for film thermoforming TVP-64/67 Opration The plastic film is unwound from the rel and warmed up in the heating module; when the preset process temp驩rature has been reached, the film is driven into the moulding zone (positive or ngative, depending on the item features) where the shape is formed, by means of vacuum and pressure in succession. After moulding the film goes into the die cutting station, where the shaped item is split from the film and, thereafter, follows to the piling station, ready for collection. The film waste is rewound again for an easy handling. Servomotor-assisted thermoforming station , for an absolute positioning accuracy High speed mould/countermould ascent and descent Servo motor die-cutting by double action, high prcision toggle Op驩ration control of ail working parameters by means of PLC User friendly, sliding touch screen interface Internai high speed communication Ethernet network Sturdy andaccessible frame which allows for easy and simple maintenance jobs Differential heating System, by means of moving louvers (patented) AN sorts of thermoplastics acceptable (PVC, PET, OPS, PP, etc.) Ergonomie design, to minimize operator stress On-line checking by modem (optional) Technical spcifications TVP-64 TVP-67 Max. web diameter 800 mm 800 mm Max. sheet width 640 mm 640 mm Max. sheet thickne ss 1,5 mm 1,5 mm Max. thermoforming area 400 x 600 mm 700 x 600 mm Min. thermoforming area 250 x 350 mm 350 x 350 mm Max. thermoforming depth in positive 140 mm 140 mm Max. thermoforming depth in ngative 140 mm 140 mm Vacuum pump flow 100 m3/h 2*100 m3/h Upper heater installed power 25,8 kW (1.500 mm) 44.1 kW (2.250 mm) Lower heater installed power (optional) 21.5 kW 21.5 kW Cutting tool installed power (optional) 4 kW 5,6 kW Total installed power 75,85 kW 100.52 kW Max. die-cutting force 60 Tm 60 Tm Dry cycle output(l) 40 cycles/min 40 cycles/min Compressed air working pressure 6 bar 6 bar Die-cutting automatic setting pr驩cision 0,05 mm 0,05 mm Thermoforming plates drive Servomotor/togg les Servomotor/togg les Die-cutting plates drive Servomotor/togg les Servomotor/togg les Downwars stacking unit Servomotor Servomotor Colour RAL 9002 RAL 9002 Power Supply 400V +T + N, 50 Hz 400V + T + N, 50 Hz (1X2) Thse figures refer to dry cycle opration and will differ under actual working conditions, depending on the plastic material and process patterns. We will gladly advise on your sp詩cifie requirements upon request. Dimensions TVP-64 TVP-67 Height 2.660 mm 2.660 mm Frame width 1.750 mm 1.750 mm Length 9.650 mm 11.850 mm Approx. weight 4.500 kg 6.500 kg 4 TVP-64/67 4_L Options Preheaters Film edges heaters Punching station Automatic modules positioning Automatic width setting On-line checking by modem Functional ancilfary equipment: chillers, compressors, dryers... Identifying ancillary equipment: markers, coders, labelers... End-of-line automation On-demand customization: product spcifications, power supply. HAiulER packaging technology HAMER PACKAGING TECHNOLOGY, S.L Rambla Antoni Gaud 08792 La Granada Barcelona - Espana Tel.: (34) 938 902 Fax: (34) 938 902 478 e-mail: hamer@hamer-pack.comwww.hamer-pack.com Represented by