SCHATZ AG Phone +49 (0)2191/698-0 www.schatz.ag EQS 5005
P. O. Box 11 06 69 Fax +49 (0)2191/60023 info@schatz-mail.de 0108_1
42866 Remscheid, GERMANY subject to technical alterations
Test unit for
door closing systems
SCHATZ.INSPECT
• parameter setting (e.g. right door, left door,...)
• storage of up to 250 measurements
• computer-assisted SPC function
• battery operation including calibration unit
Applications
In vehicle bodywork construction or in final assembly the ease
with which the door can be closed after fitting is an important
factor.
This portable measuring unit is ideal for random sampling for
auditing purposes or for obtaining characteristic values in the
laboratory.
Mains-free operation enables the unit to be used for continuous
on-site testing.
The spring unit guarantees reproducible results with ease of
operation.
The calibration unit supplied with it facilitates regular monitoring
of the recorded measurements.
Description
The unit consists of a spring unit with integral tractive force sensor
and analysis unit. The door is opened manually until the tractive
force is reached. The door is then closed by the spring unit and the
internal micro-processor calculates the energy that was required
to close the door.
The bevel-angled housing with a large display on either side
enables driver and passenger door to be tested from the relevant
angle of view.
The vehicle power supply can illuminate the display for easier
reading.
The readings obtained are recorded separately for each door and
vehicle type.