SG Standard Filter Housing0 pages

GB

Technical Data Sheet
Page 1 of 7

Filter Housing
SG Standard
The steel standard filter housings with econometer and pneumatic
drain are designed for the purification of compressed air and
gases.
Due to the modular design of the housings different filter
elements can be used.
Product description:
SG standard housings are designed for
the purification of compressed air and
gases in an industrial operation. The
flanged housings due to an optimized construction offer low differential pressures at
high flow rates and as a standard
equipped with an econometer and a pneumatic drain. A multitude of various housings with different connections, single or
multiple, allow to match the requirements
of the application, e. g. the compressor
size. This product series offers 13 different
housings ranging from a volume flow of
1080 m3/h to 38400 m3/h (related to 7 bar
(ü) and 20°C).
The SG standard filter housing conforms to
the requirements of the European directive
87/404/EG for simple pressure vessels.

Technical Data
Maximum operating pressure:

Materials:
Filter housing,
EG-type approval

Steel

0108 - 0288
0432 - 3840

16 bar
16 bar

Econometer:
differential
gauge

Plastic

Maximum operating temperature:

Pneumatic drain

Aluminium

120°C
Surface finish:
Polyester resin coating

Sealing acc. to
DIN 2690

Aramide fibers
Connection IN/OUT:
Flange DN 50 to DN 300; DIN 2633

Technical alterations reserved (R03/ 2007/04/24)
Donaldson Filtration Deutschland GmbH · Industrial Filtration Solutions · Büssingstraße 1 · D-42781 Haan · Telefon +49/21 29/569-0 · Telefax +49/21 29/569-100