C1100 pages
C110
ENCAPSULATED COIL
ØA
ØB
10,5
4.3 − THROUGH HOLE
12,4
PROTECTION DEGREE - IP 65 ( EN 60529 ) with plug connector complying with standards.
ELECTRICAL CONNECTIONS - Three spade terminals 6,3 x 0,8 (DIN 46340) for crimped connectors, two line plus one ground terminal. Also
suitable for three poles plug connectors (DIN 43650).
STANDARD VOLTAGES - DC: 12-24V – AC: 24-110-230V/50/60Hz. Other voltages on request .
VOLTAGE TOLERANCE +10% -10%
POWER - According to customer requirements for the specific use. The table shows the maximum power value admissible for continuous duty
(ED 100%).
Series and
type
Encapsulation
materials
Insulation
class
C110AN02
PA + 30% Glass fibre
(reinforced polyamide)
F
(155 °C)
Power absorption
AC (VA)
DC (W)
15
10
Operating
temperature(°C)
ED
%
Weight
(kg)
-30 / +60
100
0,12
RECOMMENDATIONS ABOUT WASTE DISPOSAL :
0702/0703
The waste disposal of the product must be carried out in accordance with EEC directives nos. 75/442, 76/403 and 78/319,their modifications,
updating and possible local bylaws.
Because of the presence of both antimony trioxide and glass fibres, bear in mind that incineration requires a special procedure in conformity with
local bylaws.
The product can be delivered to any waste disposal facility, if permitted by local bylaws.
THE VALIDITY OF REPORTED DATA IS REFERRED TO THE DATE OF ISSUE. POSSIBLE UPDATING ARE AVAILABLE ON REQUEST
FEATURES - Windings made by class H (180°C) wires, vacuum impregnated by polyester resin then encapsulated in thermoplastic materials
suitable for the insulation class of the product (see table below).Coil complying with VDE 0580 directive and 100% inspected.
SIRAI ELETTROMECCANICA S.r.l.
- BUSSERO (MI) – Italy - Tel. (+39) 02950371 - Fax (+39) 0295037555 – E-mail: info@sirai.com - www.sirai.com
"