V3690 pages
MICRO SOLENOID VALVE
3/2 - NC (Normally closed)
Direct acting
M5
GENERAL FEATURES
Direct acting micro solenoid valve.
Minimum overall dimensions, quick response time and high number of
cycles.
Designed for mounting in banks so to get valve groups with common
inlets and single and independent outlets. Inlet and closing groups
supplied separately. Seal gasket for coupling supplied with the valve.
For further information see the mounting scheme K29708.
Suitable to shut off liquid and gaseous fluids (verify the compatibility of
fluid with materials in contact).
TECHNICAL FEATURES
Maximum allowable pressure (PS)
Opening time
Closing time
Fluid temperature
Max viscosity
Orifice
size
(mm)
Gases
Kv
(m3/h)
Liquids
AC
Outlet M5
2
0
COIL
Continuous duty
Encapsulation material
Insulation class
Ambient temperature
Electric connections
Protection degree
Voltages
ED 100%
PA (Polyamide) fiberglass reinforced
F (155°C)
-10°C +60°C
DIN 46340
IP 40 (EN 60529) with female wire terminals
2,8 x 0,5 totally insulated
12 - 24V (+10% -5%)
(Other voltages on request)
DC
Series and type
Δp max
Δp
min
MOUNTING IN BANKS
MATERIALS IN CONTACT WITH FLUID
Body
Brass
Sealing
NBR
Internal components
Stainless steel
Seat
Brass
Core tube
Brass
16 bar
from 5ms to 10ms
from 5ms to 10ms
-10°C +90°C
3°E (22 cStokes or mm2/s)
Differential pressure (bar)
Port size
ISO UNI
4534
V369
DC
AC
0,4
-
0,4
AC (VA)
Valve
c.c.
(W)
Coil
DC
-
Power absorption
Inrush
0,08
V369B01C
ZE30C
-
Notes
Weight
(kg)
NBR
-
0,085
Holding
-
Sealings
2,5
- These micro-solenoid valves are not suitable for stagnating media subject to vaporization which deposit solid, calcareous, incrusting residues or similar.
- Sealings: NBR = Nitrile-butylene elastomer.
- Upper exhaust R (3) with internal diameter 1,3 mm.
- Available with Z031C coil on request (Electric connections: DIN 46340 – micro plug connector; Protection degree: IP65)
SIRAI™ - BUSSERO (MI) – Italy - www.sirai.com
0406/1410
NOTES
"