LOADING
میز آزمون
چگونه این محصول را خریداری کنم؟
درخواست قیمت
درخواست مشاوره و مدارک فنی
پرسش
خدمات خرید VIP
شما می توانید از سرویس رایگان نمایشگاه استفاده نموده و درخواست خود را مستقیما به شرکت سازنده ارسال نمایید و پس از دریافت قیمت و با ورود اطلاعات به " ماشین محاسبه قیمت ریالی " از قیمت ریالی کالا بصورت تخمینی مطلع شوید . اگر مایلید مکاتبه با شرکت سازنده ، تبادل اطلاعات و دریافت قیمت ارزی و ریالی توسط کارشناسان این مجموعه انجام شود لطفا از این طریق اقدام فرمایید. استفاده از این سرویس مستلزم پرداخت هزینه است . برای دریافت اطلاعات بیشتر با تلفن 41995 تماس حاصل فرمایید.
ادامه
ادامه
در صورتی که قیمت ارزی محصول را در اختیار دارید پس از عضویت و ورود به سایت می توانید فرم مربوطه را تکمیل و به همراه تصویر پرفورمای شرکت سازنده ارسال نمایید تا کارشناسان ما در اسرع وقت نسبت به محاسبه هزینه های حمل و ترخیص و صدور پیش فاکتور ریالی اقدام نمایند. هزینه استفاده از این سرویس برای هر درخواست 25 یورو می باشد. صنایع معظم در صورت تمایل به استفاده از این خدمات می توانند بدون نیاز به عضویت و پرداخت هزینه درخواست خود را به همراه کپی پرفورمای شرکت سازنده به ایمیل enquiry@iranindustryexpo.com و یا فاکس 88206264 بنام شرکت مهندسی و بازرگانی مشگاد ارسال نمایند.
در صورت عقد قرار داد مبلغ دریافتی به حساب خریدار عودت می شود.
ادامه
افزودن به لیست علاقه مندی ها
سایر سازندگان این محصول
درخواست قیمت ریالی
اگر مجموعه شما جزو صنایع مادر و معظم در فیلد پالایشگاه ، پتروشیمی ، حفاری ، نیروگاه ، معادن و فلزات ، خودروسازی ، تولید مواد غذایی و دارویی و.... می باشد لطفا درخواست خود را بر روی سربرگ به فاکس 88206264 و یا ایمیل enquiry@iranindustryexpo.com بنام شرکت مهندسی و بازرگانی مشگاد ارسال فرمایید.
کارشناسان این مجموعه در اسرع وقت با شما تماس خواهند گرفت .
بازدیدکننده محترم، از اینکه سایت ایران اینداستری را برای منابع یابی انتخاب کرده اید، از شما سپاسگزاریم.
اطلاعاتی برای نماینده شرکت SCHATZ در ایران یافت نشد.
لطفا با انتخاب هر یک از بخش های فوق، درخواست خود را ارسال فرمایید تا توسط واحد بازرگانی ایران اینداستری اکسپو بررسی شود.
مشخصات فنی
Dynamic testing of the locking characteristics of fasteners under transverse loading conditions
Vibration test for nuts and bolts
In a bolted joint designed correctly corresponding to VDI 2230 the bolt performs a clamping force which prevents the opening of the clamped parts despite external forces. The clamped parts do behave like one part and they withstand all external loads because if they move against each other a loosening of the bolted joint will be possible und the bolt might get lost or broken.
In reality it is often not possible to design bolted joints in a way they withstand external loads. It is not only the design that enables a movement of the bolted joint. Specially in the automotive construction there are bolted joint connections with very long bolts that lead to an elastic deformation under external loads and with this to a load on the bolt without movement of the fastening parts.
Test range M 6 to M 24
Measuring of clamping force and thread torque (thread torque, torsion torque and loosening torque)
Adjustable displacement (max. +/- 2 mm) and frequenzy (0 Hz ... 20 Hz) by software
All torque/angle assembly procedures are supported
Application as stand-alone system or in combination with laboratory system
The test equipment for vibration testing consists of a drive unit with adjustable displacement, a force sensor for transversal load, a measuring device for displacement and a changeable transducer with adaptors for different fastener dimensions for measuring of clamping force and thread friction.
Vibration test for nuts and bolts
In a bolted joint designed correctly corresponding to VDI 2230 the bolt performs a clamping force which prevents the opening of the clamped parts despite external forces. The clamped parts do behave like one part and they withstand all external loads because if they move against each other a loosening of the bolted joint will be possible und the bolt might get lost or broken.
In reality it is often not possible to design bolted joints in a way they withstand external loads. It is not only the design that enables a movement of the bolted joint. Specially in the automotive construction there are bolted joint connections with very long bolts that lead to an elastic deformation under external loads and with this to a load on the bolt without movement of the fastening parts.
Test range M 6 to M 24
Measuring of clamping force and thread torque (thread torque, torsion torque and loosening torque)
Adjustable displacement (max. +/- 2 mm) and frequenzy (0 Hz ... 20 Hz) by software
All torque/angle assembly procedures are supported
Application as stand-alone system or in combination with laboratory system
The test equipment for vibration testing consists of a drive unit with adjustable displacement, a force sensor for transversal load, a measuring device for displacement and a changeable transducer with adaptors for different fastener dimensions for measuring of clamping force and thread friction.