عضویت 
ورود اعضا
راهنمای خرید
1000 series0 pages
1000,1000Z
Photo Shows a 2-Bolt Rigid Sleeve Bearing Pillow
Block Unit with Bronze Bushing
Product Features
Corrosion-resistant powder coating
Cast iron one piece housing
Babbitt or Bronze sleeve
2or4-bolt base
Relubricatable
See Features & Benefits for additional info.
T- Pipe Tap
F - Bolts
Bolt Hole
Spacing (Width)
- E -
Bearing Dimensions
Babbitt | Bronze |
Part Number | Part Number |
Shaft
Diameter
A
Base to
Centerline
Height
B
Distance
Between
Bolt Holes
G
Bolt Hole
Spacing
(Width)
Approx.
Weight
2-Bolt
V2 | 1008 | 1008Z | % | 23/s | 3% | 1% | 1 | 5/,6 | 3/S | 1 72 | 17l6 | 72 | Vs | 0.80 |
7s | 1010 | 1010Z | 78 | 3 | 4% | 2 | 1% | 7s | 72 | 1% | 172 | 7S | 7S | 1.60 |
% | 1012 | 1012Z | 1.50 | |||||||||||
7s | 1014 | 1014Z | 1 | 31A | 4 1/2 | 2 | 13/s | 3/S | 72 | 1 3732 | 17, | 7S | Vs | 1.90 |
15/,6 | 1015 | 1015Z | 1.70 | |||||||||||
1 | 1016 | 1016Z | 1.60 | |||||||||||
1 V8 | 1018 | 1018Z | 1 Vi | 4 | 5% | 2V2 | 15/8 | 3/S | 7S | 23/s | 2 | 7S | Vs | 2.60 |
13/16 | 1019 | 1019Z | 2.50 | |||||||||||
1 V, | 1020 | 1020Z | 2.40 | |||||||||||
1 7s | 1022 | 1022Z | 13/s | 5 | 6% | 3 | 2 | 72 | 7, | 2 17,6 | 23/s | 17,6 | V, | 4.50 |
17,6 | 1023 | 1023Z | 4.30 | |||||||||||
1 72 | 1024 | 1024Z | 4.10 | |||||||||||
1 17,6 | 1027 | 1027Z | 15/s | 5 72 | vu | 3 72 | 2 7, | 72 | % | 3 7,6 | 2% | 78 | V, | 6.00 |
1 % | 1028 | 1028Z | 5.70 | |||||||||||
1 15/,6 | 1031 | 1031Z | 1% | 6 | 8 | 4 | 2% | 7S | 3 72 | 3 7s | 1 | V, | 8.50 | |
2 | 1032 | 1032Z | 8.30 | |||||||||||
23/l6 | 1035 | 1035Z | 2 | 6V2 | 8V2 | 41/2 | 3 | 1 | 378 | 3% | 1 | 7s | 11.00 | |
27/,6 | 1039 | 1039Z | 7 | 9% | 5 | 3 7, | 17s | 43/s | 3% | 17s | 7s | 15.00 | ||
2 15/,6 | 1047 | 1047Z | 2 72 | 8V2 | 11 | 6 | 4 | 7S | vu | 5 | 4 72 | 1% | 7s | 26.00 |
4-Bolt
37,6 | 1055F | 1055FZ | 3 | 10 | 2% | 12V2 | 7 | 5 | 7, | 17s | 6 | 5 7, | 17, | 72 | 39.00 |
3 15/,6 | 1063F | 1063FZ | 3 7, | 11 | 3 | 13% | 8 | 5 72 | 7, | 172 | 6 7,6 | 57s | 17s | 72 | 54.00 |
Additional Notes
Please call 1-866-REXNORD for availability
One pipe tapped hole for lubrication
Grease cup or fitting not included
For the Selection Guide, Load Ratings and Speed Limits, seethe Link-Belt Sleeve
Bearing Engineering section
Note: Dimensions subject to change. Certified dimensions of ordered material furnished
on request.
Link-Belt Rigid Sleeve Bearings
Pillow Blocks - 467
"
