Scotch Marine Series 2000 pages

HURST

HURST PERFORMANCE SERIES BOILERS

STANDARD FEATURES

Boiler is of the two-pass, scotch type, built and stamped in accordance with the requirements of the

ASME Code, and listed by the National Board of Boilers and Pressure Vessel Inspectors.

Large combustion chamber with low heat release for complete combustion.

Smoke box is front-mounted with slip-on stack connector.

Access to fireside is accomplished with hinged and davited rear door and with split front doors.

Flame observation ports are on front and rear.

Openings for cleanout inspection of waterside are provided with 3" x 4" hand holes, and with

12" x 16"manholes (80 HP up).

Insulated with 2" high-density mineral wool, lagged with 22 gauge grip jacketing, baked on epoxy

enamel to resist chipping and fading.

Firetubes are rolled and beaded on power boilers, expanded and flared on low pressure boilers.

Supports include lifting lugs securely welded to the top of shell; structural steel support legs on

skids support the boiler so that special foundations are not required.

Minimum Maintenance with Rigged Construction for Extra-Long Life

Standard Steam Trim

% Operating & High Limit pressure control

% Modulating pressure control (when appl.)

Water column with gauge glass, combination

low water cut-off & pump control

| L.W.C.O. Control w/ 2nd AUX Probe

Steam pressure gauge, syphon & test cock

% Water column drain valve

% Safety relief valve(s) per ASME Code

Standard Water Trim

Operating & High limit temperature control

Modulating temperature control (when appl

Probe type low water cut-off control

Combination pressure, temperature, altitude gauge

Hot water return baffle for shock resistance

Safety relief valve(s) per ASME Code

HBC-09502

01/2011

iS hurstboiler.com

HURST BOILER & WELDING CO., INC.

100 Boilermaker Lane • Coolidge, GA 31738-0530

Tel: (229) 346-3545 • Fax: (229) 346-3874

email: lnfo@hurstboller.com

BOILER & WELDING CO., INC

HVHILHBLE LUITH LOLU NDX

2-PASS FIRETUBE DESIGN

15-800BHP

Two Pass Design Eliminates Refractory

Baffles Between Flue Gas Passes.

STEAM

Pressures to 15-30

HOT WATER

Section I and Section IV

HURST PERFORMANCE

SERIES BOILERS