Mounted Compactors - HS Series0 pages

Mounted Compactors
SPECIFICATIONS
40589 02/2004 Stanley Hydraulic Tools
3810 S.E. Naef Road
Milwaukie, Oregon 97267
Tel 503•659•5660
Fax 503•652•1780
HS Series
MODEL 2500 3000 6000 8000 11000 22000
Performance USA/Metric USA/Metric USA/Metric USA/Metric USA/Metric USA/Metric
Centrifugal Force 2500 lb/1150 kg 3400 lb/1542 kg 6400 lb/2902 kg 8000 lbs/3630 kg 11,350 lb/5147 kg 22,000 lb/10,000 kg
Frequency 2l00 vpm 2l00 vpm 2000 vpm 2000 vpm 2000 vpm 2100 vpm
Dimensions and Weight
Spread between pins 9 in/23 cm 9 - 14 in/23 - 36 cm 14 in/35.6 cm 14 in/35.6 cm Flat Top Flat Top
Baseplate size 11 x 23 in/ 17.4 x 20 in/ 23 x 26 in/ 24 x 30 in/ 27 x 30 in/ 32 x 42 in/
28 x 58 cm 44.5 x 51 cm 58 x 66 cm 61 x 76 cm 69 x 76 cm 81 x 107 cm
Length 29.5 in/75 cm 25.5 in/65 cm 31 in/79 cm 37.6 in/95.5 cm 35 in/89 cm 45 in/ 114 cm
Width inside Bracket 8.25 in/21 cm 10.25 in/26 cm 10.6 in/26.9 cm 10.7 in/27.2 cm N/A N/A
Height 18.5 in/47 cm 18 1/2 in/47 cm 24 in/61 cm 28.7 in/73 cm 29 in/73.66 cm 41.25 in/104.78 cm
Width 11.5 in/29 cm 17.5 in/44.5 cm 23 in/58 cm 24 in/61 cm 27 in/69 cm 32 in/81 cm
Weight 260 lb/118 kg 370 lb/168 kg 825 lb/374 kg 975 lbs/442 kgs 1425 lb/646 kg 2200 lb/998 kg
Mounting Pin Diameter 1.5 in/38 mm Universal* Universal* Universal* Universal* Universal*
Hydraulic Requirements
Rated Hydraulic Flow 7 - 9 gpm/ 9 or 13 gpm/ 13 gpm/ 24 gpm/ 30 gpm/ 42 gpm/
26 - 34 lpm 34 or 49 lpm 49 lpm 91 lpm 113 lpm 159 lpm
Min. Carrier System Flow 12 gpm/45 lpm 12 gpm/45 lpm 22 gpm/83 lpm 28 gpm/106 lpm 40 gpm/151 lpm
Max. Carrier System Flow 25 gpm/95 lpm 25 gpm/95 lpm 40 gpm/151 lpm 50 gpm/189 lpm 60 gpm/227 lpm
Operating Press. (up to) 1500 psi/ 1600 - 2000 psi/ 1800-2000 psi/ 2000 psi/ 1800-2150 psi/ 1800-2250 psi/
105 bar 110 - 140 bar 127-140 bar 138 bar 124-148 bar 124-155 bar
*Contact factory for appropriate mounting hardware for your application
Stanley’s HS series of mounted compactors
are designed for extreme-duty
applications and built to deliver maximum
vibratory force.
Stanley compactors can take the
worst kind of punishment because of
their patented baseplate design with
rubber outboard shock mounts. This
design results in a more rigid plate
which evenly distributes the vibration
and extends the life of both compactor
and carrier.
For soil compaction, the HS series
compacts backfill lifts of up to four
feet - more than five times the efficiency
of hand held compactors without
the associated safety and maintenance
problems. For slope compaction,
the HS series is the only way to
efficiently compact materials on an
incline.
The HS series can also drive and
extract piles, fence posts, sheeting,
I-beams, soldier piling, guardrails
or pipe.
All models (except model HS2500)
come standard with flow control to
prevent overspeeding. Overspeeding
can reduce bearing life and produce
low-quality compaction.
The HS Series compactors can be
easily switched from one carrier to
another by means of a universal
mounting bracket which can accept
various sizes of pins and bushings.
The HS series keeps your crew out
of the trench during compaction and
is far more productive than handheld
equipment.
Model HS8000 Shown