RESOLCOAT 10100 pages
RESOLCOAT 1010
Technical data sheet 12/05/011
See TechNotes N°3 et N°5
Hardeners 1014 & 1016
Water based Epoxy Resin
Mat or High gloss primer & varnish
1 / 1 Easy mixing ratio in Volume
Uses water to clean brushes and rollers
Extreme low viscosity will prime any porous material in depth
May be applied on humid substracts.
RESOLCOAT 1010 is a unique water based epoxy system. It may be used in a very large number of
applications such as primer, varnish, veneer adhesive but also as matrix for self levelling compounds or
mortars. Domains of application range from marine construction, furniture manufacturing, industrial &
residential construction and fine arts.
Apart from hydrophobic subtracts, the 1010 system is compatible with most supports such as wood,
concrete, plaster, stone, ceramic, metal..etc. It can be highly diluted in water so its viscosity can result
extremely low, resulting in a prime choice material for priming. It is used as wood primer on new woods
& timbers but also as hardening material when applied of injected in old woods for conservation or
purposes. Less diluted, it becomes a transparent varnish highly resistant to abrasion. It will enhance the
colour of woods and other materials such as ceramics or carbon fibre.
Applied in maximum 2 thin layers, it's micro-porosity to vapour will enable the 1010 to be used as a water
barrier for materials that need to breath (wood, concrete).
RESOLCOAT 1010 is available in 2 finish versions: 1010/1014 will always be used as first priming coat
and as finish coat for high gloss results. The 1016 hardener used as finish coat on top of the 1010/1014
will enable mat finish aspects.
RESOLCOAT 1010 does not contain any solvents, has no VOC emissions and does not smell when
applied unlike any other varnishes. This new generation varnish offers a harmless alternative to all
solvented products. Cleaning of tools shall be done with warm water and soap.
Page 1/5
RESOLTECH RESOLVING YOUR ENGINERING CHALLENGES
www.resoltech.com
"