Lumiglas Luminaire USL 070 pages

lumiglas®
lumiglas
Data Sheet 06.07
EN ISO 9001
Q A: 041003296
Lumiglas Luminaire series USL07
Lumiglas Luminaire USL07 with fastenings
Lumiglas Luminaire USL07,
installed on a circular sightglass DIN 28120
• For mounting on sightglass fittings
equally suited for combined sight/light port (single flange
version) or separate light and sight ports (dual flange version).
• Compact, high light output
• Dazzle free illumination
• Exceptionally large light exit thanks to carefully designed
screwed lens assembly
• Suitable for:
- bolted circular sightglass fittings to DIN 28120/DIN 28121
or similar
- screwed sightglass fittings to DIN 11851 sizes DN 100 upwards
- flow indicators
• Nominal sizes: depending on fitting type; from DN 50 upwards
•Application:
for the illumination of the internals of normally enclosed
vessels such as silos, storage tanks, reactors and agitated
vessels as well as flow indicators in non explosion hazardous
areas.
• Suitable for use on food processing plant
• Protection:
Dust and waterjet proof – when correctly installed –
IP 65 EN 60529/DIN VDE 0470 Part 1
• Operating conditions:
Independent of vessel internal pressure/vacuum.
On no account may the luminaire be used as a closure/means
of sealing of a (pressure) vessel i. e. without a suitable sightglass
fitting.
• Ambient temperature condition operating range:
This unit is suitable for ambient temperatures of 80° C at the
cable gland. Where ambient temperature lies above 40° C,
heat-resistant cable e. g. Sinotherm 110 H05GG-F 3G 1,5 mm2
must be fitted.
• Electrical data:
This unit is suited for AC/DC voltage, depending on type of
luminaire.
• Power supply: without built-in-transformator:
24 V… halogen filament lamp 50 W
or 100 W, DC/AC
230 V… halogen filament lamp 50 W, 75 W
or 100 W, DC/AC
with built-in-transformator:
230 V… halogen filament lamp 12 V/50 W, AC
120 V… halogen filament lamp 12 V/50 W, AC
• Lamp sockets: please see table following page
• Transformers:
Transformers with 24 V secondary voltage are optionally
available.
F.H.Papenmeier GmbH & Co. KG · division Lumiglas
Talweg 2 · 58239 Schwerte · GERMANY
phone: +49-2304/2050 · fax: +49-2304/205206
e-mail: info.lumi@papenmeier.de
www.lumiglas.de