Digital Position Indicator0 pages

Monroe PMP 1030 Doris Rd. Auburn Hills, MI 48326 Phone: 800-440-3967 Fax: 800-453-9683 E-Mail: sales@monroepmp.com Web site: www.monroeengineering.com Digital Position Indicator - Direct Drive Digital Position Indicator - Direct Drive Installation Instructions for DD51 and DD52 1. Zero set the spindle. 2. Fit the indicator onto the spindle. 3. Mark the machine frame by means of the rear locating pin by rotating the indicator (do not use a hammer). 4. Pull out the indicator and drill a 0 6mm by 10mm deep hole. 5. Re-fit the zeroed indicator onto the spindle and make sure the rear pin locates into the hole. 6. Tighten the socket head set screw. Elesa Registered Design Results 1 - 16 of 16 Item # RPM (Max.) Type Reading After 1 Rթvolution Clockwise / Counter clockwise Rotation direction increasing CE986103 500 AN 000.50 Clockwise CE986104 500 AN 000.50 Counter Clockwise CE986133 250 AN 001.00 Clockwise CE986134 250 AN 001.00 Counter Clockwise CE986153 1500 AN 0001.00 Clockwise CE986154 1500 AN 0001.00 Counter Clockwise CE986183 1250 AN 0002.0 Clockwise CE986184 1250 AN 0002.0 Counter Clockwise CE986603 500 AR 000.50 Clockwise CE986604 500 AR 000.50 Counter Clockwise CE986633 250 AR 001.00 Clockwise CE986634 250 AR 001.00 Counter Clockwise CE987103 500 FN 000.50 Clockwise CE987104 500 FN 000.50 Counter Clockwise CE987133 250 FN 001.00 Clockwise CE987134 250 FN 001.00 Counter Clockwise Results 1 - 16 of 16 8/3/2011 | Page 1 of 1