MecVel - PF.01000 pages

PF.0100
Electronic driver for 1 or 2 indipendent actuators
or 2 synchronized actuators 12/24V 15A
FEATURES
• Independent control and synchronous mode
• Driver power stage operates with PWM
• Customizable acceleration and deceleration ramps
• Extreme precision and control for movement and brake
• Current and temperature limit
• Stop with limit switches
• Parameters editable in an easy and fast way thanks to a PC interface and
through a USB serial converter
• Control of movements in synchronous mode by encoders with Hall effect;
setting of the electronic limit switches opening and closing
• Compatible with a wide range of products and different applications
• High efficiency and low losses of power stage

PF.0100 is designed for two different modes: control of one or two independent actuators and control of two synchronized actuators with DC
motors through MOSFET transistors with pulse width modulation (PWM).
In mode “2 synchronized actuators”, PF.0100 ensures the balancing of actuators also in case of extremely different loads in terms of weight,
shape, or distribution on the surface, allowing a stroke without any difference between the two actuators.

TECHNICAL DATA
• Power supply: 12 to 48 V DC, maximum ripple 20%
• Output current: 15 A for actuator, in duty cicle S3 - 30% - 5 minutes
• PWM frequency 10 kHz
• Stand by power consumption: 50 mA @ 24 V
• 12 digital inputs (3-12 V): 8 for commands and limit switches, 4 for encoders (max 1 kHz), with operating logic programmable (positive/
negative)
• 2 digital outputs NPN open collector (max 50 mA - 24 V): one for the fault and one programmable
• Dimensions:
without heat sink for currents up to 10 A: 86x72x30 mm (WxHxD)
with heat sink for currents over 10 A: 86x72x50 mm (WxHxD)

MecVel S.r.l. - Via Due Portoni 23 - 40132 Bologna - ITALY - Tel +39 051 4143711 - Fax +39 051 404567

info@mecvel.com www.mecvel.com