Development Platform RainboW-G7D

Qseven Generic Carrier Board
SPECIFICATIONS
Display
7” 800x480 TFT LCD
VGA Port/ TV Out *
HDMI with Audio Support
LVDS Display Connector - 2 (1 Optional)

Touch Panel
Capacitive Multitouch
4 wire Resistive Touch*

Video Input

CMOS Camera Port (CN003VEF2052*)
MIPI Camera Port (LI-OV5640-MIPI-AF*)
TV IN*

Audio
AC’97 External Audio Codec
Headphone / Mic Jacks

PCIe
PCIe x 1 Port
Full PCIe Mini Card*
4Port PCIe Switch Gen2.0*
PCIe Port 2 - SMD Pad Header*
PCIe Port 3 - SMD Pad Header*

USB
USB2.0 Device - Micro AB Connector
USB2.0 Host Type A Connector - 2 Ports
USB3.0 Controller*
USB3.0 Host - 2 Ports*
USB 2.0 Host Port4 through Type A Connector

Serial
UART Debug Console- USB Micro AB Connector
UART- DB9 Connector*

Storage
SATA Port1 – 7P Connector*
SATA Port2 - 22P Connector
#
8 bit Standard SD Slot

Communication

10/100/1000Mbps Ethernet - RJ45 MagJack
802.11b/g/n Wi-Fi Module (WYSAAVDX7*)
CAN - 2 Ports
GPS through UART (iWave GPS Module*)
#

Add-On Headers:
Keypad Header
JTAG Header*
SPI Header
SDVO Header*
Qseven Control Signal Header*
LPC Header*
VGA Header*

iW-RainboW-G7D is a generic Qseven Carrier board targeted for quick
validation of high performance Qseven R2.0 compatible CPU modules. This
board has rich set of features including Video IN/ OUT, Audio, Wired/ Wireless
communication, PCIe, USB and various serial communication ports. Being a
nano ITX form factor with120mmx120mm size, the board is highly packed with
all necessary onboard connectors to validate complete Qseven supported
features.

iW-RainboW-G7D HIGHLIGHTS

Ideal for quick development
Shortens product development life cycle
Quick customization can be done in a very shorter period
Suitable for validation of any R2.0 Qseven compatiable module

APPLICATIONS :

Industrial / Medical, Green Energy Controller, Panel PC, Industrial appliance
Control, Medical HMI, High-end PDAs, Secure Devices, Automotive In Vehicle
Infotainment Systems, Kiosks, POS, General Embedded.
Sensors:

Additional Features:

Digital eCompass Sensor
Ambient Light Sensor
3-Axis Accelerometer
Altimeter/Barometer

RTC Coin Cell Holder
EEPROM*
120-pin Carrier Board Expansion Connector

Control Buttons:
Power On/Off Button
Reset Button
Tamper Switch*

Power
12V DC Input
On-board RTC Coin Battery

Form Factor: 120mm x 120mm – Nano ITX
Operating Temperature: 0 to 60°C

* Optional
# Either 8-bit Standard or Wi-Fi Module only can be used at a time

www.iwavesystems.com