Inductive ring and tube sensors.0 pages

Position sensors and object recognition

product news

Keep track of detail –
detection of small metal parts.
Inductive ring and
tube sensors.
Static and dynamic versions.
High resolution: even steel balls with
Ø 0.6 mm are reliably detected.
Extremely quick with a response time of
0.2 ms.
Pulse stretching and sensitivity adjustable
via potentiometer.
Choice between normally closed or
normally open.

Static sensors operate like inductive proximity sensors.
They generate an output signal as long as there is metal
in the detection zone. So, feed processes for example with
falling screws or jam monitoring can be implemented.
Dynamic sensors are used when particularly small parts
are to be detected. During a damping operation a short
pulse is generated at the output of the sensor, adjustable
from 0.1 to 150 ms. The high resolution is maintained
for a long time even in case of metal contamination on
the tube.

fluid sensors
and diagnostic
systems
position
sensors
and object
recognition

bus,
identification
and control systems