REVERSIBLE RATCHET HANDLE WITH SQUARE DRIVE ½?0 pages

HG

TECHNICAL SHEET

REVERSIBLE RATCHET HANDLE WITH SQUARE DRIVE ½”
PRODUCER: „HUBIX"

CHARACTERISTICS
Insulated tool, made of CrV. Insulation, red, made of polyamide with the 30% addition fibreglass.
The tool has a change-over of drive direction. Tool is controlled and tested (10kV/10s) in
accordance with EN 60900:2004.
Square drive: ½”
Length: 250mm
Weight: 450g

APPLICATION
Live working up to 1000V a.c. and 1500V d.c. Tool is used with male hex. socket wrenches HNI or
HNIL, socket wrenches HN or HNL and extension bars HPN 125 or HPN 250 to tighten or loosen
screws, nuts and bolts. It’s used on overhead lines and connecting boxes.

STORAGE AND MAINTENANCE
Insulated or insulating hand tools should be properly stored to minimize the risk of damage to the
insulation due to storage or transportation. These tools should be stored generally separated from
other tools to avoid mechanical damage or confusion. Tool should be prevented from excessive heat
and sun light. Use a dry tissue to clean. When tool becomes strong soiled use suitable solvent to
clean.

CHECK AND PERIODIC INSPECTION
Before use, each hand tool should be visually inspected by the user. An annual visual examination by
a suitably trained person is recommended to determine the suitability of the tool for further service.
The visual check shall be considered successful if:
o The tool (in particular the insulation) is free from external defect,
o The marking is legibly and complete.