BINCEN Weighbridge for Diffferent scale body structure choice0 pages
INSTURCTION
(τ type structural steel profiles)
一Technology field.
The utility model involving profiles, especially a τ type structural steel profiles.A kind of τ
type of Weigh-bridge,including L type of foundation beam and horizontal geotextile,the main
idea is that put at the top of the L type of foundation beam with horizontal geotextile.
.Contents
二.Contents of the invention.
The utility model is designed to provide a bearing box beam with simple structure, bending,
twisting, bearing plate tensile strength, and good performance of the structural steel profiles, it
is to use H-steel and channel steel combined profiles, namely: τ type steel profiles (hereinafter
referred to as "τ section").
The purpose of this utility model adopted by the technical scheme, including L foundation
beam, horizontal reinforcing plate, the mentioned L foundation beam on the face placed a
horizontal reinforcing plate.
The utility model, wherein the L-shaped foundation beam and horizontal reinforcing plate
welding connection between a fillet weld.
The utility model as scale body box girder. Of the three profiles, H-beams, Channel Steel, τ
section
at the same weight condition, τ type steel scale body is highest strength, because the
same τ type steel girder,the height can improve 40mm or so. Girder strength is directly
proportional to its height cubed and proportional to the square of thickness; Under the same
weight, increase girder height ratio will improve strength much better than increase girder
thickness. Such as: #28A H-beam, #28A Channel-Steel and τ type steel(unit length and weight
per unit are basically same), compared to τ section,its height can reach (280 mm + 40 mm =)
320 mm, 320/280 = 1.143, 1.1433 = 1.493, namely: the basic unit of length and weight of τ
section which its bending strength increase more than 40% compared to its basically same
weight of H-beams, channel steel . τ section applied in scale body as box girder, the scale
plate bearing the effect is the same as H-beam,which is not easy to fracture.. When exist τ
section, making truck scale body panel increase of service life, rather than increasing the
panel thickness only,meanwhile, improve the electronic truck scale on general effectiveness
and save cost. Another,τ steel section is also applied to the other bearing box beam.