NTV-100RG - Low cost GPS synchronized NTP Server0 pages

NTP Server/ Network Time Device
NTV-100RG

o
o
o
o
o
o

Compact size and low cost
Uses Network Time Protocol to synchronize computers and other devices
Programmable serial message compatible with almost any time display
Browser based user interface for easy setup
GPS synchronized
LED colons indicate GPS lock status

Brandywine Communications Network Time Device provides a convenient and flexible means of
accurately time synchronizing computers, time
displays, PBXs, and a wide variety of other
equipment.
The NTV-100RG is a small rack mounted GPS
synchronized Network Time Server. Using the
built-in GPS receiver, the NTV accurately
synchronizes its internal clock. It then provides
accurate time to clients on the network using the
industry standard Network Time Protocol (NTP).
It also outputs a time message once per second
through its built-in serial ports. Both RS-232 and
RS-485 ports are provided. The time message
format is user programmable and can be used to
synchronize almost any device.

Management of the NTV internals is by means of
a built-in web browser interface. This password
protected web page allows the user to set up the
text string required for the equipment to be synchronized. Time zone offsets and daylight savings setup are also accessed through the same
web page.
The NTV may also be used in a client configuration. In this configuration the NTV will synchronize to a Network Time Server over the
Ethernet connection and output serial time
messages suitable for driving time displays or
other devices.
Brandywine Communications also offers a
complete line of time displays that are
synchronized by NTP over a network connection.

1153 Warner Ave ● Tustin, CA 92780 ● 714-755-1050 Phone ● 714-755-0175 Fax

www.brandywinecomm.com

sales@brandywinecomm.com