SG2 for flat-head printers0 pages
Wax/resin - SG2
For flat-head printers
The SG2 is a wax resin ribbon with a special ink formulation that gives crisp printed images.
It has an additional top coating and unique release layer which provide smudge and scratch
resistance beyond current industry standards.
The SG2 allows printing on to a wide range of label materials but is specifically designed
to print on high gloss paper and polyethylene. The chemical nature of the ink allows high
quality image printing at speeds up to 250mm/s (depending on the application and the
characteristics of the printer).
Toshiba SG2 ribbons – smearless r esults time after time.
Available for
B-442
B-452
B-SV4T
B-443
B-852
B-SA4
Characteristics
● Excellent on rough to high gloss papers
● Crisp rotated barcodes
● High speed printing
● Excellent smudge and scratch resistance
Specifications
Ink
Type
Carrier
Total thinkness
Wax/resin
8.6 ± 0.6 µm
Base film thinkness
Printed properties
4.8 ± 0.4 µm
Ink thinkness
3.7 ± 0.5 µm
Transmition Density
Min. 1.4*
Print Density
Durability
Min. 1.9
Label stock
Paper
Print speed
6 IPS (print desity 1.75)
Smudge resistance
(20 cycles @ 800 grms with cotton cloth)
Scratch resistance
(20 cycles @ 380 grms with stainless steel pointed tip)
Colours
ANSI A1
ANSI A1
Black
ANSI = American National Standard Institute
A = Excellent, B = Above average, C = Average, D = Below average , E & F = Poor
*Please note that not using TOSHIBA approved ribbons affects any printer and printhead warranties offered
by TOSHIBA Europe. All company and/or product names are trademarks and/or registered trademarks of
their respective owners. All features and specifications are subject to change without notice.