Monitoring Units in oil circulating systems0 pages

1-3022-EN

Monitoring Units
for efficient and precise monitoring of individual flows in circulating
oil lubrication systems

Application

Advantages

The VARIOLUB pulse monitoring system
is used to monitor and evaluate incoming
pulses (e.g. from gear-wheel type flow indicators or progressive feeders) from circulating
oil lubrication systems. A constant comparison of actual incoming values with previously
programmed limit values makes it possible
to quickly detect faults. That helps to prevent
machine outages.

• Modular design, so the lubrication system
can be adapted to machines and systems
at any time.

• It is easy to assign a lube point or machine
group to the monitoring unit since its
compact design makes it possible to install
it near the lube point.

• The pulse meters have 12 measuring
A data link can be established with the
process control level or a higher-ranking OPC
server to meet the customer’s requirements.
Via an OPC server, it is also possible to link
up with an SKF condition monitoring system.
This applies equally to other condition monitoring systems

inputs and can be connected to each other
via RS 232 interfaces. The system is variable and can be expandedon demand.

• Expansions and reductions in the number
of lube points or adjustments of the lubricant quantity can be realized without any
problems.

• Monitoring near the lube points/assemblies
is possible.

• Interfacing with all customary condition
monitoring systems is possible.

• Standard interface for :
• RS 232
• Profibus DP
• Field bus systems with NAMUR inputs
conforming to DIN 19234

• Ethernet-OPC link