2200 Series0 pages

R/I transmitter

2202
– Input for Pt100, Ni100 or Ohm
– Sensor cable compensation
– Linearized analog output
– 24 VDC or universally supplied
– Individual 0 and 100% adjustment

Advanced features
• 0 and 100% adjustments on the front face can be adjusted
individually without interacting.

Connection

Application
• Linearized temperature measurement with Pt100 (to IEC 751)
or Ni100 (to DIN 43760) sensors.
• Conversion of linear resistance change to standard analog
current/voltage signal from for example valves or linear
movements with attached potentiometer.
• Signal simulator via externally mounted 10-turn
potentiometer, to aid with installation and commissioning
plant.
• 3-wire connection cable compensation or 2-wire connection
without cable compensation.
• Sensor error detection with Upscale, Downscale or custom
set values.
• Reversible inputs with 0% set to maximum value of the
desired input range and 100% set to the minimum value of
the desired input range.
Technical characteristics
• Analog current and voltage output options include 0/4...20
mA, 0/2...10 VDC and special ranges.
• Galvanic isolation between supply and input / output ground.
• Mounting for a standard 11-pole socket which can be adapted
for DIN rail or plate use with PR’s 7023 adaptor and 7024
mounting keying.

This page is automatically generated on the basis of information provided on www.prelectronics.com and affiliated websites. It is provided to you as a service and for information
purpose only. While we have attempted to maintain the information as accurately as possible, the page may contain errors or omissions for which we disclaim any and all liability