RF Admittance Level Measurement Universal IV Sales0 pages

DREXELBROOK

®

A Leader In Level Measurement Solutions

Universal IV™ Series Pro and Lite Models
RF Admittance/Capacitance Continuous Level
Measurement System
Features and Benefits:

The Universal IV™ Series is the fourth generation RF continuous
system built on Drexelbrook’s 50 years of experience in level
measurement. The product is backward compatible with the
industry standard Universal III™, Univeral Lite™, Universal II™
and RCT™ Series and is the ideal solution for a wide array of
applications. A few enhancements to the Universal IV Series
include worldwide hazardous location approval, standard display/
keypad, autoranging capabilities and state of the art stable and
accurate measurement.

Pro Model
The Universal IV™ Pro model integrates the RF Admittance
technology pioneered by Drexelbrook with the versatility of
Cote-Shield™ technology that ignores coatings on the probe
and measurement span of 1" to 800'. The Pro is compatible
with a vast array of applications: conductive, insulating, and
heavy or light coating.

Lite Model
The Universal IV™ Lite model is the entry level RF Capacitance
measurement system without Cote-Shield™ capabilities. Lite
models can be used in non-coating conductive liquids and
insulated coating applications where Cote-Shield™ is not
required. In addition, the Lite model offers a measurement range
up to 20' typically.

•t Proven Drexelbrook level solution for the most
common to the most challenging applications
•t The most versatile level technology for liquids, slurries,
interface and granules measurement
•t Over 125 probe types for a wide array of applications,
flex, rigid, wetted materials and process connections
•t 2-wire, 4-20mA loop transmitter with the widely
accepted digital HART protocol
•t Process temperature from cryogenic to 1000°F
(537°C)
•t Process pressure from vacuum to 10,000 PSI (690
BAR)
•t Measurement span as short as 1” (25mm) to 800 ft
(244m), no dead zone or blocked measurement areas
•t Proven Cote-Shield™ technology that ignores coating
build-up on the probe
•t Immune to vapor, dust and foam interference
•t Immune to tank obstructions such as nozzles, ladders,
pipes and agitators
•t Low cost of ownership, no maintenance, and no
moving parts to wear out
•t Stable, repeatable, and accurate measurement within
0.25% of range
•t Built-in isolation and surge protection for increased
reliability
•t Easy one-time calibration, configure it once and go
•t Free PC-based HRTWIN™ configuration software for
initial setup from anywhere on the loop or a handheld
HART®communicator can be used
•t Standard user friendly push-button LCD display for
configuration and monitoring
•t Integral and remote installation. The transmitter
can be integrated with the probe, or for harsh
environmental conditions it can be installed remotely
away from the probe/vessel
•t Worldwide approvals: FM, FMc, ATEX, IECEx and CE
mark
•t Hazardous location approvals, Intrinsic Safety (IS) and
Explosion Proof/Flameproof for Class I, Div I, and Zone
0 installations
•t Fully backward compatible with Drexelbrook’s leading
products such as Universal III, Universal Lite and RCT
series
•t 50+ years of Drexelbrook applications knowledge that
ensures the right solution for your application