SB 474 Cable glands0 pages

Cable Glands
SB 474
Hazardous Area
91
Flameproof Exd & Increased Safety Exe
Dual Certified ATEX / IECEx
Application
15.0mm 'G' Approx (Fully Compressed Length)
• Outdoor or indoor use.
• For particular use with:Male
Entry Thread
- Cables that are not effectively filled, compact and/or circular,
Female Entry
Thread
Metric
Entry
have tape bedding or have hygroscopic fillers.
- Cables that exhibit ‘Cold Flow’ characteristics.
- Enclosures for gas group IIC, under 2 litres in volume and
containing an ignition.
- Enclosures for gas groups IIA and IIB, which are greater than
2 litres in volume and contain an ignition source.
• See technical section for installation rules and regulations.
Size Ref.
A
B
C
CABLE GLAND SELECTION TABLE
N
Male Entry Thread Size
Female Entry Thread Size
d
NPT *
NPT #
T
Metric
Metric
Standard or Option
Standard or Option
M20
¾" or ½"
M20
M25
1" or ¾"
M25
M32
1¼" or 1"
M32
-
Hexagon Dimensions
'G'
Across Flats
Across Corners
56.4
48.2
61.6
30.0
36.0
46.0
32.5
39.5
50.5
All dimensions in millimetres (except * where dimensions are in inches). Metric entry threads are 1.5mm pitch as standard, 15mm length of thread.
# NPT female thread sizes equivalent to those shown in the table for the male thread size are available. Hexagon dimensions as shown may alter.
Technical Data
• Flameproof Exd and Increased Safety Exe II 2 GD ExtD A21.
• Certificate No’s: Baseefa06ATEX0056X and IECEx BAS 06.0013X.
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas
Groups IIA, IIB and IIC.
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1,
IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to
IEC/EN 60529 and NEMA 4X.
• Deluge Protection to DTS01.
• Operating Temperature Range: -60°C to +80°C.
• Assembly Instruction Sheet: AI 309.
• Alternative certification options available:
Exd IIC / Exe II
GOST R-Exe IIU
• Provides a barrier seal between the individual insulated cores
•
•
•
•
within the cable and prevents entry of the products of an explosion
into the cable.
The required number of holes for the cores are punched in the
seal by means of a special tool to suit the core size.
Provides female running coupler for cable gland or conduit entry.
Manufactured in Brass (standard), Nickel Plated Brass,
316 Stainless Steel or Aluminium.
Brass NPT entries are nickel plated as standard.
CABLE GLAND SIZE FOR CORE SIZE AND NUMBER
Max. No.
Cores Cross Sectional Area mm²
of Cores
1.5
2.5
4.0
6.0
10.0
GOST K- Approved for use in Kazakhstan
PUNCH TOOL SIZE DETAILS
Punch Ref.
No. 1
No. 2
Cores C.S.A.mm²
1.5 - 2.5
4.0 - 6.0
Features
No. 3
10.0
7
4
3
A&B
-
A&B
-
B&C
-
C
B
-
C
B
Ordering Information
Format for ordering is as follows: To obtain punch tool required, refer to tables.
Cable Gland Type
SB 474
Size
C
Thread
M32
Punch Tool Required
Punch Tool No.1
Cable Gland Type
SB 474
Size
C
Thread
11/4"NPT
Punch Tool Required
Punch Tool No.1
Connection Solutions
HPG01
UPD 090610
www.ehawke.com