Zinc Selenide coatings: Anti-reflection coating0 pages
Reflection Coating on Z\n; t^-mde for "LOJ^J:^
Technical D-ta "::~......:i r:.....01
Application
This coating is used on Zinc Selenide lenses and windows in high power laser applications where low
absorption is important.
Transmission
For a 2mm thick witness piece, coated on both sides with
UCS_ZAR_01
T> 99.35% for 10.6pm
Reflection
Per surface, AOI from 0° to 15°
R < 0.2% for 10.6pm
Absorption
For a 7mm thick lens
Absorption < 0.25%
Environmental
Adhesion MIL-C-48497A, 08/09/1980, para 4.5.3.1 Tape test
Humidity MIL-C-48497A, 08/09/1980, para 4.5.3.2 24hrs, 49°C, 95-100% relative humidity
Abrasion MIL-C-48497A, 08/09/1980, para 4.5.3.3 Moderate, 50 wipes with a cheesecloth
Sizes
Up to 300mm diameter
Typical Reflection Values
UCS_ZAR_01 Reflection per surface
4.0%
3.5%
3.0%
2.5%
20%
1.5%
1.0%
0.5%
0.0%
9.5 10 10.5 11
Wavelength (urn)
11.5 12
Umicore Coating Services Ud
Kinnouil Street
Dundee, DD2 3ED
Tel: +441382 833022
Fax: +441382 833824
e-mail:coafingservfces@umicore.com
DCS reserves the right to amend or withdraw specifications without prior notice
VAT No: 503 0068 05
Registration No: 118425
Issue No. 2
"