PSL/ PSL-AMS0 pages

Optional accessories
The PSL acutators from PS Automation have a modular concept and
are available in many variations; the
upgrading with accessories is even
possible on site.
Accessories for a PSL
A PSL can be adapted to all requirements concerning controlling and
regulating material flows, e.g. with the
following accessories:
•tAdditional limit switches and
t intermediate position switches
•tSingle or double potentiometer
•tHeating resistor
•tElectronic position indicator and valve
tpositioner

For a PSL-AMS:
Additional status signal
Possible by using potentialfree additional limit switches/
intermediate position switches
For a PSL-AMS:
Local control
Enables manual operation
and the access to parameters
and diagnosis on site without
needing a PC. Moreover, the
valve position is shown in an
illuminated display.
For a PSL-AMS:
Integrated process controller
Enables the independant
control of a process, without
the need for an external controller. The specification of the
process setpoint is made via
fieldbus or an analogue signal
(mA or V). 24 V DC sensor power supply is integrated (max.
100 mA).

PS Automation GmbH
Gesellschaft für Antriebstechnik
Philipp-Krämer-Ring 13 • D-67098 Bad Dürkheim
Tel.: +49 (0) 63 22-60 03-0 • Fax: +49 (0) 63 22-60 03-20
info@ps-automation.com • www.ps-automation.com

Engineered and Made in Germany

For a PSL-AMS:
USB-/fieldbus-/bluetooth
interfaces
Enables the communication
between actuator and PC via
USB data cable as well as the
parameterizsation and reading
out the diagnosis
For a PSL-AMS:
Power failure backup
Integrated emergency supply
on the basis of super-capacitors. Enables the actuator
to have an emergency operation in case of power failure
in a freely adjustable safety
position.

PSL
PSL-AMS
Linear actuators
1 kN - 25 kN
AMS programmable