ادامه
در صورتی که قیمت ارزی محصول را در اختیار دارید پس از عضویت و ورود به سایت می توانید فرم مربوطه را تکمیل و به همراه تصویر پرفورمای شرکت سازنده ارسال نمایید تا کارشناسان ما در اسرع وقت نسبت به محاسبه هزینه های حمل و ترخیص و صدور پیش فاکتور ریالی اقدام نمایند. هزینه استفاده از این سرویس برای هر درخواست 25 یورو می باشد. صنایع معظم در صورت تمایل به استفاده از این خدمات می توانند بدون نیاز به عضویت و پرداخت هزینه درخواست خود را به همراه کپی پرفورمای شرکت سازنده به ایمیل enquiry@iranindustryexpo.com و یا فاکس 88206264 بنام شرکت مهندسی و بازرگانی مشگاد ارسال نمایند.
در صورت عقد قرار داد مبلغ دریافتی به حساب خریدار عودت می شود.
ادامه
اگر مجموعه شما جزو صنایع مادر و معظم در فیلد پالایشگاه ، پتروشیمی ، حفاری ، نیروگاه ، معادن و فلزات ، خودروسازی ، تولید مواد غذایی و دارویی و.... می باشد لطفا درخواست خود را بر روی سربرگ به فاکس 88206264 و یا ایمیل enquiry@iranindustryexpo.com بنام شرکت مهندسی و بازرگانی مشگاد ارسال فرمایید.
کارشناسان این مجموعه در اسرع وقت با شما تماس خواهند گرفت .
بازدیدکننده محترم، از اینکه سایت ایران اینداستری را برای منابع یابی انتخاب کرده اید، از شما سپاسگزاریم.
اطلاعاتی برای نماینده شرکت Höntzsch در ایران یافت نشد.
لطفا با انتخاب هر یک از بخش های فوق، درخواست خود را ارسال فرمایید تا توسط واحد بازرگانی ایران اینداستری اکسپو بررسی شود.
-
Fluid:
for gas
-
Fluid:
for liquids
-
Function:
hydraulic pressure-control
-
Mounting:
in-line
-
Mounting:
insertion
-
Other characteristics:
precision
-
Protection level:
IP67
-
Technology:
vortex
The flow vortices are ultrasonically scanned. In this way, compared to other scanning methods, flow velocities of as little as 0.5 m/s can be measured coupled with turndown ratios of 1 : 160. The vortices modulate the ultrasonic beam between an ultrasonic transmitter and receiver. The vortex frequency results from the demodulation.
A crucial advantage of the principle of measurement lies in the independence of density, pressure and temperature from the working medium.
Principle of measurement
Vortex flow sensors VA have no moving parts, have outstanding fatigue strength even in rough conditions, excellent repeatability, long-term stability and are overload-proof. Measuring is practically inertia-free. The length of cable between sensor and evaluation unit can measure up to several hundred meters.
Solids are of no impairment as long as abrasion does not occur. In comparison to the vane wheel flow sensors, vortex flow sensors can be used for measuring in gases with considerably intensive solids content, without impairing the fatigue strength.
The pictured sensor with salt deposits was installed in a mine for several weeks. The slight deposits on the strut can easily be seen. In soiled condition drifts of max. +/- 0.3 m/s result for velocities of up to approx. 12 m/s.